[Andriy]

I want to show you how I make the valve. The only drawback is that you need to make two of them. One to inflate, the other to deflate. But it’s still easier than a Boston valve. I can’t post a photo of the boat without permission, since I designed it myself, so I’m posting a photo of the valve so you can understand the principle on a boat with a smooth side inside. If you’re interested, I’ll add more photos.

[Andriy]

The translator did not translate correctly. These two valves are lighter than one Boston valve.

[Andriy]

I use a translator, so please excuse any mistakes. I want to share my soldering iron modification. I combined two soldering irons. I took the base from a mechanical one and the handle from an electronic one. I drilled an additional hole in the base for the temperature sensor and also made a hole in the handle (in the plastic) for the wires. Everything else fits and does not need to be modified.

[Andriy]

Hello, everyone! I am not a bot. How do I post on the forum? I would like to share my experience in making accessories. I have some interesting ideas.

[Author]

Replies